Ο αρχικός ZEN CAN, ο πλήρως αναλογικός μας ενισχυτής ακουστικών, διέθετε την ικανότητα να οδηγεί δύσκολα φορτία ακουστικών, έναν balanced σχεδιασμό κυκλώματος, τα εξαιρετικά χαμηλά επίπεδα παραμόρφωσης και την ευέλικτη προσαρμογή του ήχου. Το ZEN CAN Signature το μεταφέρει σε άλλο επίπεδο. Βελτιώνει περαιτέρω την ποιότητα ήχου με βελτιωμένη σχεδίαση κυκλώματος, ενώ διατηρεί τα ευέλικτα χαρακτηριστικά της «κανονικής» έκδοσης και προσθέτει κάτι ιδιαίτερο – μια προσαρμοσμένη ρύθμιση EQ προσαρμοσμένη με ακρίβεια σε ολόκληρη την καμπύλη απόκρισης συχνότητας για να αξιοποιήσει στο έπακρο κάθε μοντέλο ακουστικών

Enhanced circuitry. Premium components. Signature Sound.

The original ZEN CAN, our all-analogue headphone amplifier, excelled at driving demanding headphone loads with its balanced circuit design, extremely low distortion, and exceptional sonics. The ZEN CAN Signature takes this design further, featuring enhanced circuitry and audiophile-grade components.

Its balanced, symmetrical dual-mono circuitry can deliver a maximum of 1,890mW (11.0V) into 64-ohm loads and offer over 15V to loads of 600 ohms or higher, all through its balanced output.

3 In, 3 Out. Free to Connect.

The ZEN CAN Signature offers a range of input options, including stereo RCA, 3.5mm single-ended, and 4.4mm balanced inputs, making it versatile enough to connect with your laptops, phones, or DACs.

For output, it provides a 4.4mm balanced option for headphones that support balanced connections. It also features a 6.3mm jack for headphones with standard single-ended connectors. If you’re using earphones with a 3.5mm plug, a 3.5mm to 6.3mm adapter is available, so there’s no need to worry.

The unit also includes an analogue balanced output on the back panel, ideal for connecting active speakers via a 4.4mm to XLR adapter. As the ZEN CAN Signature is fully balanced and dual-mono circuit design, this is the recommended output option.

Premium Inside and Out

The ZEN CAN Signature employs a military-spec PCB to enhance signal integrity. It also incorporates audiophile-grade components, such as:

• ELNA Silmic II and OS-CON capacitors offer excellent noise reduction capabilities and frequency characteristics.
• iFi/AMR ‘OV’ ‘Operationsverstärker’ series op-amps provide low noise and distortion, delivering performance that equals or surpasses many high-end headphone amplifiers.
• For more details, refer to the photo below.

Unlike other headphone amplifiers that come with standard power supplies like those for notebooks, the ZEN CAN Signature includes the iFi iPower2 power supply. This features Active Noise Cancellation II to eliminate all incoming EMI and RFI noise, ensuring a clean and clear audio experience. The iPower2 is already exceptional, being more than 10 times quieter than standard power supplies. For those looking to further enhance their setup, consider the DC iPurifier2, which can further reduce system interference, as well as the iPowerX power supply.

What's Included

• iFi Zen CAN Signature

• iFi DC Power Adapter

• RCA Stereo Interconnects

• 3.5mm to 1/4" Single Ended Adapter

• User Manual

• 12 month factory warranty

Input / Output

• 4.4mm Pentaconn Balanced Output

• 4.4mm Pentaconn Balanced Input

• Single Ended 3.5mm Input

• Single Ended RCA Stereo Input Pair

• 4.4mm Pentaconn Balanced Headphone Out

• 1/4" Single Ended Headphone Out

The Specs

• Selectable Gain Stage: 0dB(Default) 6dB/12dB/18dB

• SNR: 122dB(A) Balanced

• Total Harmonic Distortion (Balanced/Single-Ended): 0.0066% (BAL), 0.0058% (SE)

• Max Output Power 16 ohms: 3.0 V / 600 mW (BAL), 4.0 V / 1000 mW (SE)

• Maximum output power 300 ohms: 5.1 V / 756 mW (BAL), 7.6 V / 196 mW (SE)

• Max Output Power 600 0hms: 15.2 V / 385 mW (BAL), 7.6 V / 98 mW (SE)

• Output Impedance BAL/SE: <2 Ohms/<1 Ohms

• Frequency Response:(-3dB): 10 Hz – 200 kHz

• Power Consumption: MAX 13 W / 2.6A

• Weight 1.87 lbs / Dimensions 6.3(W)" x 4.6(D)" x 1.4(H)"