Cartridge & Stylus |
Frequency Response |
20-50,000 Hz |
Channel Separation |
30 (dB at 1 kHz) |
Vertical Tracking Angle |
20° |
Vertical Tracking Force |
1.6-2.0 g (1.8 g standard) |
Stylus Construction |
Nude |
Recommended Load Impedance |
Min. 100 ohms (when head amplifier connected) |
Coil Impedance |
12 ohms (1 kHz) |
DC Resistance |
12 ohms |
Coil Inductance |
25 µH (1 kHz) |
Output Voltage |
0.5 mV (1 kHz, 5 cm/sec.) |
Output Channel Balance |
0.5 dB (1 kHz) |
Stylus Shape |
Special line contact |
Cantilever |
0.28 mm diameter solid boron |
Static Compliance |
25 x 10-6 cm/dyne |
Dynamic Compliance |
15 x 10-6 cm/dyne (100 Hz) |
Mounting |
Half-inch |
Cartridge Weight |
8.5 g (0.30 oz) |
Dimensions |
17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.0 mm (0.98") D |
Accessories Included |
Non-magnetic screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush |
Threaded Hole |
M2.6 x 2 |
Notes |
Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable. |